Coating Excellence Jakob Albertsen Komposit A/S
Dansk Engelsk Tysk
ftop-01.jpg
ftop-03.JPG
ftop-04.JPG
ftop-05.JPG
ftop-06.jpg
ftop-07.JPG
ftop-08.JPG
ftop-09.JPG
ftop-10.JPG
ftop-11.JPG
ftop-12.JPG
top-13.jpg
Technology

Jakob Albertsen Komposit A/S will be the leading surface treatment company in Denmark delivering functional coating to the industrial sector.

Technology

 

Technology
Sponge Jet consists of very small polyurethane sponges, which, depending on the purpose, may be reinforced with tiny particles of aluminium oxide. The sponges can be used to clean contaminants and oil off surfaces, for sand-blasting, and for roughening even tough surfaces. The sponges suck all the dust off the material blasted, and generate minimal rebound on account of their low weight.
 
     

In order to use Sponge Jet, you need a feed unit. The Sponge Jet material to be used is poured into the feed unit, which uses a rotating worm conveyor to lead it into the blasting hose and out through the nozzle pointed at the area to be cleaned or blasted. The feed unit has a control panel which makes it possible to regulate both the blasting pressure and feed rate of the material blasted onto the surface to be cleaned.

   
     
Sponge Jet abrasive media can be reused up to 10 times. The media can be collected using a vacuum cleaner or a simple brush and bucket and then cleaned in a recycler. The cleaning process involves the material being vibrated through grilles of different sizes. This removes impurities and blasted material from the Sponge Jet media, which can then be reused in the feed unit. Two sizes of recycler are available, and they can be supplied both electrically or pneumatically powered.    
Jakob Albertsen Komposit A/S      Aasiaatvej 5B      DK-5700 Svendborg      Phone.: +45 62 20 20 58      Fax: +45 62 20 15 14      mail@jakob-albertsen.dk